Material Safety Data Sheet (MSDS)
Customize your battery in any size, shape, and capacity, Wholesale with competitive price, quote within 12 hours, Find the battery with IEC, UL, RoHS, CE, MSDS, certificates
LIPOL BATTERY CO., LTD.
Model/type reference………………..: LP452050
Nominal Voltage………………………: 3.7V
Typical Capacity………………………: 400mAh, 1.48Wh
Shape and Physical Dimension
(mm)…………………………………….: W: 20.0mm
Version number………………………..: V1.0
Preparation Date………………………: May, 12, 2017~May 22, 2017
Revision date…………………………..: May 22, 2017
Laboratory……………………………..: Shenzhen BCTC Testing Co., Ltd.
BCTC Building & 1-2F, East of Building, Pengzhou Industrial,
Address………………………………..: Fuyuan 1st Road, Qiaotou Community, Fuyong Street,
Bao’an District, Shenzhen, China
- IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING
Recommended use of the chemical and restrictions on use
Recommended Use: Used in portable electronic equipments;
Uses advised against:
a)Do not dismantle, open or shred secondary cells or batteries.
b)Do not expose cells or batteries to heat or fire. Avoid storage in direct sunlight.
c)Do not short-circuit a cell or a battery. Do not store cells or batteries haphazardly in a box or drawer where they may short-circuit each other or be shore-circuited by other metal objects.
d)Do not remove a cell or battery from its original packaging until required for use.
e)Do not subject cells or batteries to mechanical shock.
f)In the event of a cdll leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
g)Do not use any charge other than that specifically provided for use with the equipment.
h)Observe the plus(+) and minus(-)marks on the cell, battery and equipment and ensure correct use.
i)Do not use any cell or battery which is not designed for use with equipment.
j)Do not mix cells of different manufacture, capacity, size or type within a device.
k)Battery usage by children should be supervised.
I)Seek medical advice immediately if a cell or a battery has been swallowed.
m)Always purchase the battery recommend by the device manufacturer for the equipment.
n)Keep cells and batteries clean and dry.
o)Wipe the cell or battery terminals with a clean dry cloth if they become dirty.
p)Secondary cells and batteries need to be charged before use. Always use the correct charger and refer to the manufacturer’s instructions or equipment manual for proper charging instructions.
q)Do not leave a battery on prolonged charge when not in use.
r)After extended periods of storage, it may be necessary to charge the discharge the cells or batteries several times to obtain maximum performance.
s)Retain the original product literature for future reference.
t)Use only the cell or battery in the application for which it was intended.
u)When possible, remove the battery from the equipment when not in use.
v)Dispose of properly.
2. HAZARDS IDENTIFICATION
No harm at the normal use. If contact the Electrolyte liquid in the Li-ion Battery, reference as follows:
Classification of the substance or mixture
Classification according to GHS
Acute Toxicity, Oral(Hazard category 4)
Acute Toxicity, Dermal(Hazard category 3)
Skin, irritate(Cagegory 1B)
Eye Irrtate(Hazard category 1)
3. COMPOSITION/INFORMATION ON INGREDIENTS
Chemical characterization: Mixtures
Product: Consisting of the following components.
4. FIRE-FIGHTING MEASURES
Suitable Extinguishing Media
CO2, dry chemical powder, water spray.
Specific Hazards Arising from the Chemical
Formation of toxic gases is possible during heating or in case of fire.
In case of fire, the following can be released:
Other irritating and toxic gases.
Hazardous Combustion Products
Sensitivity to Mechanical Impact No
Sensitivity to Static Discharge No
Protective Equipment and Precautions for Firefighters
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH(approved or equivalent)and full protective gear. For example: Wear self-contained respiratory protective device.
Wear suitable protective clothing and eye/face protection.
Special hazards arising from the substance or mixture:
Battery may burst and release hazards decomposition products when exposed to a fire situation.
Lithium ion batteries contain flammable electrolyte that may vent, ignite and produce sparks when subjected to high temperature(>150°C), When damaged or abused(e.g. mechanical damage or electrical overcharging); may burn rapidly with flare-burning effect; may ignite other batteries in clothes proximity.
5. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Personal Precautions Avoid contact with eyes.
Refer to section 8 for personal protective equipment. Ensure adequate ventilation. Remove all sources of ignition.
Evacuate personnel to safe areas.
Absorb with liquid-binding material(sand, diatomite, acid binders, universal binders, sawdust).
Methods and material for containment and cleaning up
Methods for containment Prevent further leakage or spillage if safe to do so.
Methods for cleaning up Use personal protective equipment. Dam up. Cover liquid spill with sand, earth or other Non combustible absorbent material. Pick up and transfer to properly labeled containers. Clean contaminated surface thoroughly.
6. FIRST-AID MEASURES
First aid measures
Eye Contact Rinse thoroughly with plenty of water, also under the eyelids. If symptoms persist, call a physician.
Skin Contact Remove contaminated clothing and shoes. Wash skin with soap and water. In the case of skin irritation or allergic reactions see a phasician.
Inhalation Move to fresh air. If symptoms persist, call a physician.
Ingestion Do NOT induce vomiting. Drink plenty of water. If symptoms persist, call a physician.
Most important symptoms and effects, both acute and delayed
Swallowing Do not induce vomiting. Get medical attention.
7. HANDLING AND STORAGE
Precautions for safe handling
Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin, eyes and clothing. Wear personal protective equipment.
Was thoroughly after handling. Use this material with adequate ventilation.
The product is not explosive.
Conditions for safe storage, including andy incompatibilities.
If the Lithium-ion Battery is subject to storage for such a long term as more than 3 months, it is recommended to recharge the Lithium-ion Polymer Battery periodically.
3 months: -10°C~+40°C, 45 to 85%RH.
And recommended at 0°C~+35°C for long period storage.
The capacity recovery rate in the delivery state(50% capacity of fully charged)after storage is assumed to be 80% or more.
The voltage for a long time storage shall be 3.8V~4.8V range.
Do not storage Lithium-ion Battery haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by other metal objects.
Keep out of reach of children.
Do not expose Lithium-ion Polymer Battery to heat or fire. Avoid storage in direct sunligh.
Do not store together with oxidizing and acidic materials.
Keep ignition sources away—Do not smoke.
Store in cool, dry and well-ventilated place.
8. EXPOSURE CONTROLS AND PERSONAL PROTECTION
Individual protection measures, such as personal protective equipment
9. STABILITY AND REACTIVITY
Reactivity: Stable under recommended storage and handling conditions.
Chemical stability: Stable under normal conditions of use, storage and transport.
Thermal decomposition/conditions to be avoided: No decomposition if used according to specifications.
Possibility of Hazardous Reactions: None under normal processing.
Hazardous Polymerization: Hazardous polymerization dose not occur.
Conditions to avoid: Strong heating, fire, Incompatible mateirals.
Incompatible materials: Strong oxidizing agents. Strong acids. Base metals.
Hazardous Decomposition Products: Carbon oxides, other irritating and toxic gases.
10. DISPOSAL CONSIDERATIONS
Waste treatment methods
Recommendation: Must not be disposed together with household garbage.
Do not allow product to reach sewage system
Recommendation: Disposal must be made according to official regulations.
11. TRANSPORT INFORMATION
The Lithium Ion Polymer Battery had been tested according to the requirements of the UN manual of tests and Criteria.
The Lithium Ion Polymer Battery with a Watt-hour rating not exceeding 100Wh or the cell with a Watt-hour rating in not exceeding of 20Wh.
The packaging shall be adequate to avoid mechanical damage during transport, handling and stacking. The materials and pack design shall be chosen so as to prevent the development of unintentional electrical conduction, corrosion of the terminals and ingress of moisture.
Meets requirements of International Maritime Dangerous Goods(IMDG)-2014 Special Provision 188 to be transported as non-dangerous goods;
Meets the requirements of 49CFR173.185 to be transported as non-dangerous goods for road, rail, air, and vessel.
Meets the requirements of TDG special provision 34 to be transported as non-dangerous goods.
The package must be handled with care and that a flammability hazard exists if the package is damaged;
12. PHYSICAL AND CHEMICAL PROPERTIES
13. REGULATORY INFORMATION
Safety, health and environmental regulations/legislation specific for the substance or mixture
Get an answer before you buy LiPo Batteries. Whether a quote or a specification request from our LiPol battery section, We do not provide telephone support, the reason being that it is impossible to offer a quality product at an attractive price or answer your questions without making some compromises. We have decided to compromise on human resources rather than the technical.