3.7V LiPo battery LP251730 90mAh 0.33Wh with a safety circuit and 50mm wires

Thickness 2.5mm, LiPo Batteries with protection circuits, It will increase the thickness if fold the board or extend the length if unfold the board.

Trying to find good quality LiPo batteries with proper documentation and certifications for the new product.

This battery has a capacity of 90mAh for a total of about 0.33Wh. If you need a larger battery, we also have a 90mAh+ model

If you need the protection circuit on the battery with a temperature sensor, you can add with 10K NTC.

Protective Circuit (Prevent the battery from short-circuiting), NTC (Thermistor) and Connectors (Molex, JST & Hirose) are assembled when requested.

Also, you can choose the connector that you need to add with the battery, The connectors we use are mainly from three famous brands” Molex”, “JST” and “Hirose”. All battery connectors from Molex or JST are available to add to our lipo battery with the custom length of wires, wire sequence & wire colors. You can browse the following page to select the connectors you want.

Choose the suitable battery connector for your LiPo Battery

Our LiPo Battery Safe with Japan IC+MOS & Compact Shape & Long Cycles Life.

The LiPo battery included protection circuitry keeps the battery voltage from going too high (over-charging) or low (over-use) which means that the battery will cut-out when completely dead at 3.0V. It will also protect against output shorts. However, even with this protection, it is very important that you only use a LiIon/LiPoly constant-voltage/constant-current charger to recharge them and at a rate of 45mA or less.
Like most LiPo batteries we sell do not have thermistors built in. This is why we suggest charging at 1/2C or even less – 90mA max in this case which is how much you can get from a USB port.

Flexible Support of LiPo batteries requirement: Simpler & faster Manufacturing, A cleaner & Greener process, Differentiated performance whatever your application, High energy and power cell for mobility applications, Bring us your special application.

Additional safety notes: Do not use a NiMH/NiCad/lead-acid charger! Also, do not abuse these LiPo batteries, do not short, bend, crush or puncture. Never charge or use unattended. Always inspect LiPo batteries and surrounding circuitry constantly for any damage, loose wiring, or the possibility of short circuits. Polarity matches all Adafruit LiPoly/LiIon chargers and boards, other brands may have reverse polarity and can destroy your battery. As with all LiPo batteries and with any power source – they should be used by experts who are comfortable working with power supplies.

Application With 90mAh LiPo Batteries:

Hot Selling 90mAh LiPo Batteries:

Check within 90mAh LiPo Batteries: