3.7V rechargeable LiPo Battery LP503040 560mAh With PCM and Molex Connector And NTC

Adopt our manufacturing model as your low-cost market entry strategy.Make the vision happen with us.

This battery has a capacity of 560mAh for a total of about 2.07 Wh. If you need a larger battery, we also have a 600mAh+ model

The LiPo batteries come pre-attached with the most popular 3P connector for LiPo batteries with NTC connection Molex 51021-0300 as shown and include the necessary protection circuitry. Because they have a genuine Molex connector, not a knock-off, the cable won’t snag or get stuck in a matching Molex jack, they click in and out smoothly.

The included protection circuitry keeps the battery voltage from going too high (over-charging) or low (over-use) which means that the battery will cut-out when completely dead at 3.0V. It will also protect against output shorts. However, even with this protection it is very important that you only use a LiIon/LiPoly constant-voltage/constant-current charger to recharge them and at a rate of 280mA or less.
Like most LiPo batteries we sell do not have thermistors built in. This is why we suggest charging at 1/2C or even less – 560mA max in this case which is how much you can get from a USB port.

Additional safety notes: Do not use a NiMH/NiCad/lead-acid charger! Also, do not abuse these LiPo batteries, do not short, bend, crush or puncture. Never charge or use unattended. Always inspect LiPo batteries and surrounding circuitry constantly for any damage, loose wiring, or the possibility of short circuits. Polarity matches all Adafruit LiPoly/LiIon chargers and boards, other brands may have reverse polarity and can destroy your battery. As with all LiPo batteries and with any power source – they should be used by experts who are comfortable working with power supplies.

Application With 500mAh LiPo Batteries:

Hot Selling 500mAh LiPo Batteries:

Check with 500mAh LiPo Batteries: