LP4690114 6000mAh 3.7V Rechargeable LiPo Battery with connector JST XHP-2(B)

This 3.7V Rechargeable LiPo Battery capacity is 6000mAh, 22.2Wh LiPo Battery, 3.7V LiPo Battery with PCM and wires typically, 6000mAh 3.7V LiPo Battery Cell is available. NTC and connector can be added as your request.

This 3.7V Rechargeable LiPo Battery capacity is 6000mAh, 22.2Wh LiPo Battery, 3.7V LiPo Battery with PCM and wires typically, LiPo Battery Cell is available. NTC and connector can be added as your request.

This LiPo Battery size is 4.6mm* 90mm* 115mm; the tolerance of our LiPo Batteries is: LiPo Battery Thickness ± 0.3mm, LiPo Battery width ± 0.5mm, LiPo Battery length ± 1mm.

This LiPo battery has a capacity of 6000mAh for a total of about 22.2Wh; We also have another 90mAh LiPo battery if you need it.

Also, you can choose the connector that you need to add with LiPo batteries, The connectors we use are mainly from three famous brands” Molex,” “JST” and “Hirose.” All LiPo Batteries connectors from Molex or JST are available to add to our LiPo battery with the custom length of wires, wire sequence & wire colors. You can browse the following page to select the connectors you want.

Choose the suitable LiPo Battery connector for your LiPo Batteries.

With Standard LiPo Battery, We suggest charging the lipo battery with 0.2C-0.5C current, and the discharge current of the standard lipo battery is 0.5C-1C.

All LiPo Batteries can add with 10K NTC, thermistors built-in as your request, the LiPo Battery includes protection circuitry that keeps the battery voltage from going too high (over-charging) or low (over-use); the lipo battery will cut out when completely dead at 3.0V. It will also protect against output shorts. However, even with this protection, it is imperative that you only use a LiIon/LiPoly constant-voltage/constant-current charger to recharge them at a rate of 0.5C or less.

Additional safety notes: Do not use a NiMH/NiCad/lead-acid charger! Also, do not abuse these LiPo batteries, do not short, bend, crush or puncture. Never charge or use unattended. Always inspect LiPo batteries and surrounding circuitry constantly for any damage, loose wiring, or the possibility of short circuits. Polarity matches all Adafruit LiPoly/LiIon chargers and boards, other brands may have reverse polarity and can destroy your battery. As with all LiPo batteries and any power source – they should be used by experts who are comfortable working with power supplies.

Application With 6000mAh 3.7V Rechargeable LiPo Battery:

Similar LiPo Battery with 6000mAh 3.7V Rechargeable LiPo Battery:

Similar LiPo Battery Model with 6000mAh 3.7V Rechargeable LiPo Battery: