3.7V Rechargeable LiPo Battery LP543450 1000mAh with protection circuit and wires 50mm and JST connector

The most recyclable LiPo battery with Flexible Support of LiPo battery requirement.

This battery has a capacity of 1000mAh for a total of about 3.7Wh. If you need a larger battery, we also have a 1000mAh+ model

The LiPo batteries come pre-attached with the most popular connector for LiPo batteries with 3pin connector JST PHR-2 as shown and include the necessary protection circuitry. Because they have a genuine JST connector, not a knock-off, the cable won’t snag or get stuck in a matching JST jack, they click in and out smoothly.

The included protection circuitry keeps the battery voltage from going too high (over-charging) or low (over-use) which means that the battery will cut-out when completely dead at 3.0V. It will also protect against output shorts. However, even with this protection, it is very important that you only use a LiIon/LiPoly constant-voltage/constant-current charger to recharge them and at a rate of 500mA or less.
Like most LiPo batteries we sell do not have thermistors built-in. This is why we suggest charging at 1/2C or even less – 1000mA max in this case which is how much you can get from a USB port.

Additional safety notes: Do not use a NiMH/NiCad/lead-acid charger! Also, do not abuse these LiPo batteries, do not short, bend, crush or puncture. Never charge or use unattended. Always inspect LiPo batteries and surrounding circuitry constantly for any damage, loose wiring, or the possibility of short circuits. Polarity matches all Adafruit LiPoly/LiIon chargers and boards, other brands may have reverse polarity and can destroy your battery. As with all LiPo batteries and with any power source – they should be used by experts who are comfortable working with power supplies.

Application With 1000mAh LiPo Batteries:

Hot Selling 1000mAh LiPo Batteries:

Check with Hot Selling LiPo Batteries:

Check with 1000mAh LiPo Batteries: