High Rate Discharge LiPo Batteries 10C

Accurate Size & Safe with Japan IC+Mos & Density Capacity

If you know the continuous current and the capacity of the pack you want, you can easily determine the C rate you need. If you are drawing 5A from a 1000mAh pack, simply take the current and divide by the capacity: 5A = 5000mA, 5000mA / 1000mAh = 5C.
High Rate LiPo batteries is also given a C rate in terms of burst, which is the rate at which the battery discharges in a short period of time. A 1000mAh LiPo batteries, the burst rate is 10C, which means the battery can provide 10 x 1000mA=10000mA current for several seconds.

High Rate Discharge LiPo Batteries 10C

China High-quality supplier of high rate discharge LiPo battery, Running a Lehner motor at pretty high power/ high C batteries/ high rate discharge LiPo batteries. Ask sample & datasheet for developing the prototype. Short delivery time & Fast air shipment.

 

  • Stable operating voltage of 3.7V
    Higher discharge rate for the device
  • Outstanding discharge rate with LiPo batteries.
  • Huge capacity can support to the motor and other power devices
  • High energy density for your choose
  • Good performance and long cycle life
    Safety and friendly

 

High Discharge current C rating describes how quickly a battery can be discharged.
Due to the high rate discharge LiPo battery use the electrode material which is favorable for high rate discharge, the internal resistance design of the electrode is smaller than that of the standard battery, so the rate battery has high discharge platform, high discharge efficiency, and high output power and energy.

Batteries with high power provide rapid discharge capability at high drain rates such as in power tools or automobile starter battery applications. Typically, high power batteries have low energy densities.

High rate discharge LiPo batteries can be rapidly discharged in a short period. If you select the inequality High rate discharge LiPo batteries, it may lead to short-circuiting of  LiPo Batteries and even have destroyed to your devices. So it is important to select an unbeatable one to work for you. Our High rate discharge LiPo battery engineers put into more design more effort and high technology to design, manufacture High rate discharge LiPo batteries, and custom special PCM that for some personal need. The special PCM can ensure High rate discharge LiPo batteries to be more stable, safe and durable when high discharging.

Battery manufacturers often specify capacity at a given discharge rate, temperature, and cut-off voltage. The specified capacity will depend on all three factors. A battery that appears to have a high capacity on a spec sheet may actually perform poorly if the current drain for the application is higher. For instance, a battery rated at 2 Ah for a 20-hour discharge cannot deliver 2 A for 1 hour, but will only provide a fraction of the capacity.

High Rate LiPo batteries are also given a C rate in terms of burst, which is the rate at which the LiPo Battery Discharges in a short period of time. A 1000mAh LiPo battery, the burst rate is 10C, which means the battery can provide 10 x 1000mA=10000mA current for several seconds.

LiPo Battery Discharge Rate of 10C means it can provide 10 x 1000mA=10000mA current for several seconds.

Check With the High Rate LiPo Batteries 10C List:

Highly Discharged LiPo batteries 10C

Highly Discharged LiPo batteries 10C, China High-quality supplier of high rate discharge Lithium Polymer Batteries.
Part NumberCapacityC-RateSizeVoltage
LPHD32140297010C29.0 x 14.0 x 3.2mm3.7V
LPHD422003015010C30.0 x 20.0 x 4.2mm3.7V
LPHD602003020010C30.0 x 20.0 x 6.0mm3.7V
LPHD301605422010C54.0 x 16.0 x 3.0mm3.7V
LPHD681303528010C35.0 x 13.0 x 6.8mm3.7V
LPHD503003030010C30.0 x 30.0 x 5.0mm3.7V
LPHD851603031010C30.5 x 15.8 x 8.5mm3.7V
LPHD572003532010C35.0 x 20.0 x 5.7mm3.7V
LPHD701404535010C45.0 x 14.0 x 7.0mm3.7V
LPHD801803037010C30.0 x 17.8 x 7.9mm3.7V
LPHD762003540010C35.0 x 20.0 x 7.6mm3.7V
LPHD652103840010C38.0 x 21.0 x 6.5mm3.7V
LPHD412404842010C48.0 x 24.0 x 4.1mm3.7V
LPHD801804452010C45.0 x 18.0 x 7.8mm3.7V
LPHD382506760010C67.5 x 25.3 x 3.8mm3.7V
LPHD551607563010C75.0 x 16.0 x 5.5mm3.7V
LPHD581607570010C75.0 x 16.0 x 5.8mm3.7V
LPHD601607570010C75.0 x 16.0 x 6.0mm3.7V
LPHD902504075010C42.5 x 25.8 x 9.0mm3.7V
LPHD105200475010C45.0 x 20.0 x 10.8mm3.7V
LPHD683004080010C40.0 x 30.0 x 6.8mm3.7V
LPHD653004880010C48.0 x 30.0 x 6.5mm3.7V
LPHD543305180010C51.0 x 33.0 x 5.4mm3.7V
LPHD562406480010C64.0 x 24.0 x 5.6mm3.7V
LPHD651707580010C75.0 x 17.0 x 6.5mm3.7V
LPHD602605385010C53.0 x 25.8 x 6.0mm3.7V
LPHD602406485010C64.0 x 24.0 x 6.0mm3.7V
LPHD632007085010C70.0 x 20.0 x 6.3mm3.7V
LPHD255607590010C75.0 x 56.0 x 2.5mm3.7V
LPHD523406093010C60.0 x 34.0 x 5.2mm3.7V
LPHD7835042100010C42.0 x 35.0 x 7.8mm3.7V
LPHD7030048100010C48.0 x 30.0 x 7.0mm3.7V
LPHD7030048100010C48.0 x 30.0 x 7.0mm3.7V
LPHD5634061100010C61.0 x 34.0 x 5.6mm3.7V
LPHD5035062100010C62.0 x 35.0 x 5.0mm3.7V
LPHD5035062100010C62.0 x 35.0 x 5.0mm3.7V
LPHD5520101103010C101.0 x 20.5 x 5.5mm3.7V
LPHD1330035105010C35.0 x 30.0 x 13.0mm3.7V
LPHD7530048105010C49.5 x 30.0 x 7.7mm3.7V
LPHD5016145110010C145.0 x 16.0 x 5.0mm3.7V
LPHD7033051110010C51.0 x 33.0 x 7.0mm3.7V
LPHD7824056110010C56.5 x 24.0 x 7.8mm3.7V
LPHD6735062110010C62.0 x 35.0 x 6.7mm3.7V
LPHD7435062110010C62.0 x 35.0 x 7.4mm3.7V
LPHD6533065110010C65.0 x 33.0 x 6.5mm3.7V
LPHD6633065110010C65.0 x 33.0 x 6.6mm3.7V
LPHD6720078110010C78.0 x 20.0 x 6.7mm3.7V
LPHD5035064112010C64.0 x 35.5 x 5.0mm3.7V
LPHD6140050115010C50.0 x 40.0 x 6.1mm3.7V
LPHD8242040120010C40.0 x 42.0 x 8.2mm3.7V
LPHD4043085125010C85.0 x 43.0 x 4.0mm3.7V
LPHD8430048126010C48.0 x 30.0 x 8.4mm3.7V
LPHD8242040130010C40.0 x 42.0 x 8.2mm3.7V
LPHD7130060130010C60.0 x 30.0 x 7.1mm3.7V
LPHD7530060130010C60.0 x 30.0 x 7.5mm3.7V
LPHD6838064130010C65.5 x 38.0 x 6.6mm3.7V
LPHD7335062145010C62.0 x 35.0 x 7.3mm3.7V
LPHD4834096145010C96.0 x 34.0 x 4.8mm3.7V
LPHD7044049150010C49.0 x 44.0 x 7.0mm3.7V
LPHD9030055150010C55.5 x 30.5 x 9.0mm3.7V
LPHD6034082155010C82.0 x 34.0 x 6.0mm3.7V
LPHD9026066160010C66.0 x 26.0 x 9.0mm3.7V
LPHD5246094160010C94.0 x 46.0 x 5.2mm3.7V
LPHD8530060165010C60.0 x 30.0 x 8.5mm3.7V
LPHD6530082165010C82.0 x 30.0 x 6.5mm3.7V
LPHD7030082165010C82.0 x 30.0 x 7.0mm3.7V
LPHD6942058180010C58.0 x 42.0 x 6.9mm3.7V
LPHD6943058180010C58.0 x 43.0 x 6.9mm3.7V
LPHD7343058180010C58.0 x 43.0 x 7.3mm3.7V
LPHD7434096180010C96.0 x 34.0 x 7.4mm3.7V
LPHD5540078185010C78.0 x 40.0 x 5.5mm3.7V
LPHD6156052190010C52.0 x 56.0 x 6.1mm3.7V
LPHD6456052190010C52.0 x 56.0 x 6.4mm3.7V
LPHD1127060195010C60.0 x 27.5 x 11.0mm3.7V
LPHD6350062195010C62.5 x 50.0 x 6.3mm3.7V
LPHD7243058200010C58.0 x 43.0 x 7.2mm3.7V
LPHD6233097205010C97.5 x 33.0 x 6.1mm3.7V
LPHD5234122210010C122.0 x 34.0 x 5.2mm3.7V
LPHD5653065210010C65.0 x 53.0 x 5.6mm3.7V
LPHD8034066210010C66.0 x 34.0 x 8.0mm3.7V
LPHD8234066210010C66.0 x 34.0 x 8.2mm3.7V
LPHD8034096210010C96.0 x 34.0 x 8.0mm3.7V
LPHD8134096210010C96.0 x 34.0 x 8.1mm3.7V
LPHD8234096210010C96.0 x 34.0 x 8.2mm3.7V
LPHD6028122240010C122.0 x 28.0 x 6.0mm3.7V
LPHD8828092245010C92.0 x 28.0 x 8.8mm3.7V
LPHD6134118250010C118.0 x 34.0 x 6.1mm3.7V
LPHD5336128270010C128.0 x 36.0 x 5.3mm3.7V
LPHDA329078270010C78.0 x 29.0 x 10.3mm3.7V
LPHD8735087270010C87.0 x 35.0 x 8.7mm3.7V
LPHD6334122280010C122.0 x 34.0 x 6.3mm3.7V
LPHD6734122280010C122.0 x 34.0 x 6.7mm3.7V
LPHD5742085280010C85.0 x 42.0 x 5.7mm3.7V
LPHD7742080290010C80.0 x 42.0 x 7.7mm3.7V
LPHD8534096290010C98.0 x 35.0 x 8.7mm3.7V
LPHD6342085295010C85.0 x 42.0 x 6.3mm3.7V
LPHD8735087300010C87.0 x 35.0 x 8.7mm3.7V
LPHDA037075320010C75.0 x 37.0 x 10.0mm3.7V
LPHD9545090320010C90.0 x 45.0 x 9.5mm3.7V
LPHD9645090320010C90.0 x 45.0 x 9.6mm3.7V
LPHD8432115330010C115.0 x 32.0 x 8.4mm3.7V
LPHD8641082335010C82.5 x 41.0 x 8.6mm3.7V
LPHDA832088340010C88.0 x 32.0 x 10.8mm3.7V
LPHD7734122350010C122.0 x 34.0 x 7.7mm3.7V
LPHD8334122350010C122.0 x 34.0 x 8.3mm3.7V
LPHD6042126350010C126.0 x 42.0 x 6.0mm3.7V
LPHD6160085350010C85.0 x 60.0 x 6.1mm3.7V
LPHDA540078370010C78.0 x 40.0 x 10.5mm3.7V
LPHD6560085380010C85.0 x 60.0 x 6.5mm3.7V
LPHD6660085380010C85.0 x 60.0 x 6.6mm3.7V
LPHD4879095390010C95.0 x 79.0 x 4.8mm3.7V
LPHD4089107400010C107.0 x 89.0 x 4.0mm3.7V
LPHD6342126400010C126.0 x 42.0 x 6.3mm3.7V
LPHD6365085400010C85.0 x 65.0 x 6.3mm3.7V
LPHDA034096405010C96.0 x 34.0 x 10.0mm3.7V
LPHD6482073410010C73.0 x 82.0 x 6.4mm3.7V
LPHD7082073410010C73.0 x 82.0 x 7.0mm3.7V
LPHD5551143420010C143.0 x 51.0 x 5.5mm3.7V
LPHD6865085420010C85.0 x 65.0 x 6.8mm3.7V
LPHD9542080430010C80.0 x 42.0 x 9.5mm3.7V
LPHD7560085445010C85.0 x 60.0 x 7.5mm3.7V
LPHD8158094450010C95.0 x 59.0 x 8.0mm3.7V
LPHD6543128470010C128.0 x 43.0 x 6.5mm3.7V
LPHD7642126480010C126.0 x 42.0 x 7.6mm3.7V
LPHD9342126500010C126.0 x 42.0 x 9.3mm3.7V
LPHD6449140500010C140.0 x 49.0 x 6.4mm3.7V
LPHD6649140500010C140.0 x 49.0 x 6.6mm3.7V
LPHD8242124515010C124.0 x 42.0 x 8.2mm3.7V
LPHD8642124515010C124.0 x 42.0 x 8.6mm3.7V
LPHD7250115520010C115.0 x 50.0 x 7.2mm3.7V
LPHD5260129520010C130.0 x 60.0 x 5.4mm3.7V
LPHD6945135520010C135.0 x 45.0 x 6.9mm3.7V
LPHD7859098530010C98.0 x 59.0 x 7.8mm3.7V
LPHD8859098530010C98.0 x 59.0 x 8.8mm3.7V
LPHD7250115540010C115.0 x 50.0 x 7.2mm3.7V
LPHD6851143545010C143.0 x 51.0 x 6.8mm3.7V
LPHD8759098560010C98.0 x 59.0 x 8.7mm3.7V
LPHDA834124580010C124.0 x 34.0 x 10.8mm3.7V
LPHD7467096580010C96.0 x 67.0 x 7.4mm3.7V
LPHD9742126590010C126.0 x 42.0 x 9.7mm3.7V
LPHD7645148590010C150.5 x 45.5 x 7.6mm3.7V
LPHD6052129595010C129.0 x 52.4 x 6.0mm3.7V
LPHDA542126600010C126.0 x 42.0 x 10.5mm3.7V
LPHDA542126600010C126.0 x 42.0 x 10.5mm3.7V
LPHDA543128620010C128.0 x 43.0 x 10.5mm3.7V
LPHDB042126655010C126.0 x 42.0 x 10.0mm3.7V
LPHDA542126655010C126.0 x 42.0 x 10.5mm3.7V
LPHDA842126655010C126.0 x 42.0 x 10.8mm3.7V
LPHDA942126655010C126.0 x 42.0 x 10.9mm3.7V
LPHDB142126655010C126.0 x 42.0 x 11.1mm3.7V
LPHD8545150660010C150.0 x 45.0 x 8.5mm3.7V
LPHDA442126680010C126.0 x 42.0 x 10.4mm3.7V
LPHDA642126680010C126.0 x 42.0 x 10.6mm3.7V
LPHD8650140715010C140.0 x 50.0 x 8.6mm3.7V
LPHD8750140715010C140.0 x 50.0 x 8.7mm3.7V
LPHD8850140715010C140.0 x 50.0 x 8.8mm3.7V
LPHDB042126750010C126.0 x 42.0 x 10.0mm3.7V
LPHD9647145800010C145.0 x 47.0 x 9.6mm3.7V
LPHD6964159800010C159.0 x 64.0 x 6.9mm3.7V
LPHD6045270830010C270.0 x 45.0 x 6.0mm3.7V
LPHD5572200900010C200.0 x 72.0 x 5.5mm3.7V
LPHD5672200900010C200.0 x 72.0 x 5.6mm3.7V
LPHD8265146945010C146.0 x 65.0 x 8.2mm3.7V
LPHD8465146945010C146.0 x 65.0 x 8.4mm3.7V
LPHD8265146970010C146.0 x 65.0 x 8.2mm3.7V
LPHD8465146970010C146.0 x 65.0 x 8.4mm3.7V
LPHD11481571000010C159.5 x 53.5 x 11.0mm3.7V
LPHD77701701000010C170.0 x 70.0 x 7.7mm3.7V
LPHD78701701000010C170.0 x 70.0 x 7.8mm3.7V
LPHD80701701000010C170.0 x 70.0 x 8.0mm3.7V
LPHD72701751000010C175.0 x 70.0 x 7.2mm3.7V
LPHD72701751000010C175.0 x 70.0 x 7.2mm3.7V
LPHD73701751000010C175.0 x 70.0 x 7.3mm3.7V
LPHD74701751000010C175.0 x 70.0 x 7.4mm3.7V
LPHD76701751000010C175.0 x 70.0 x 7.6mm3.7V
LPHD77701751000010C175.0 x 70.0 x 7.7mm3.7V
LPHD65701961000010C196.0 x 70.0 x 6.5mm3.7V
LPHD65722001000010C200.0 x 72.0 x 6.5mm3.7V
LPHD71722001100010C200.0 x 72.0 x 7.1mm3.7V
LPHD71722001100010C200.0 x 72.0 x 7.1mm3.7V
LPHD71722001100010C200.0 x 72.0 x 7.1mm3.7V
LPHD82851551200010C155.0 x 85.0 x 8.2mm3.7V
LPHD98701701200010C170.0 x 70.0 x 9.8mm3.7V
LPHD83701751200010C175.0 x 70.0 x 8.3mm3.7V
LPHD85701751200010C175.0 x 70.0 x 8.5mm3.7V
LPHD87701751200010C175.0 x 70.0 x 8.7mm3.7V
LPHD87701751200010C175.0 x 70.0 x 8.7mm3.7V
LPHD88701751200010C175.0 x 70.0 x 8.8mm3.7V
LPHD91701751200010C175.0 x 70.0 x 9.1mm3.7V
LPHD92701751200010C175.0 x 70.0 x 9.2mm3.7V
LPHD94701751200010C175.0 x 70.0 x 9.4mm3.7V
LPHD86721751230010C176.5 x 73.0 x 8.5mm3.7V
LPHD97831451320010C145.0 x 83.0 x 9.7mm3.7V
LPHD93701751400010C175.0 x 70.0 x 9.3mm3.7V
LPHD94701751400010C175.0 x 70.0 x 9.4mm3.7V
LPHD92751751400010C175.0 x 75.0 x 9.2mm3.7V
LPHD75792071450010C207.0 x 79.0 x 7.5mm3.7V
LPHDA8751701500010C170.0 x 75.0 x 10.8mm3.7V
LPHDA0751751500010C175.0 x 75.0 x 10.0mm3.7V
LPHDA5751751500010C175.0 x 75.0 x 10.5mm3.7V
LPHDA6751751500010C175.0 x 75.0 x 10.6mm3.7V
LPHDA6751751500010C175.0 x 75.0 x 10.6mm3.7V
LPHDA7751751500010C175.0 x 75.0 x 10.7mm3.7V
LPHDA8751751500010C175.0 x 75.0 x 10.8mm3.7V
LPHD98751751500010C175.0 x 75.0 x 9.8mm3.7V
LPHD98751751500010C175.0 x 75.0 x 9.8mm3.7V
LPHD99751751500010C175.0 x 75.0 x 9.9mm3.7V
LPHD99751751500010C175.0 x 75.0 x 9.9mm3.7V
LPHD87851831500010C183.0 x 85.0 x 8.7mm3.7V
LPHD85851871500010C187.0 x 85.0 x 8.5mm3.7V
LPHD75792071540010C207.0 x 79.0 x 7.5mm3.7V
LPHDA1751751600010C175.0 x 75.0 x 10.1mm3.7V
LPHD98751751600010C175.0 x 75.0 x 9.8mm3.7V
LPHDA3851551680010C155.0 x 85.0 x 10.3mm3.7V
LPHDA4851551680010C155.0 x 85.0 x 10.4mm3.7V
LPHDA8851551680010C155.0 x 85.0 x 10.8mm3.7V
LPHDA9851551680010C155.0 x 85.0 x 10.9mm3.7V
LPHDB0751751680010C175.0 x 75.0 x 10.0mm3.7V
LPHDA1751751680010C175.0 x 75.0 x 10.1mm3.7V
LPHDA5751751680010C175.0 x 75.0 x 10.5mm3.7V
LPHDA6751751680010C175.0 x 75.0 x 10.6mm3.7V
LPHDA8751751680010C175.0 x 75.0 x 10.8mm3.7V
LPHD99751751680010C175.0 x 75.0 x 9.9mm3.7V
LPHD791202301930010C230.0 x 120.0 x 7.9mm3.7V
LPHDA6901902300010C190.0 x 90.0 x 10.6mm3.7V
LPHD791202302670010C230.0 x 120.0 x 7.9mm3.7V
LPHDA0962352750010C235.0 x 96.0 x 10.0mm3.7V
LPHDA31152153200010C215.0 x 115.0 x 10.3mm3.7V
LPHDA51152153200010C215.0 x 115.0 x 10.5mm3.7V

What are Capacity And Discharge?

A LiPo battery's capacity is the amount of electric charge it can deliver at the rated voltage. The more electrode material contained in the cell the greater it is capacity. A small cell has less capacity than a larger cell with the same chemistry, although they develop the same open-circuit voltage. Capacity is measured in units such as amp-hour (A·h). The rated capacity of a LiPo battery is usually expressed as the product of 20 hours multiplied by the current that a new LiPo battery can consistently supply for 20 hours at 68 °F (20 °C) while remaining above a specified terminal voltage per cell. For example, a LiPo battery rated at 100 A·h can deliver 5 A over a 20-hour period at room temperature. The fraction of the stored charge that a LiPo battery can deliver depends on multiple factors, including battery chemistry, the rate at which the charge is delivered (current), the required terminal voltage, the storage period, ambient temperature and other factors.

What is mAh?

The A is capitalized because, under the International System of Units, “ampere” is always represented with a capital A. The term mAh is an abbreviation for “milliampere-hour,” and it’s a way to express the electrical capacity of smaller LiPo Batteries. With larger batteries, like car LiPo Batteries, we usually use ampere-hours, or Ah. There is 1000 mAh in a single Ah. mAh is calculated by multiplying the amount of time the LiPo batteries last by the amperes of the discharge current.

Simple Guidelines for Discharging LiPo Batteries :

Heat increases LiPo batteries performance but shortens life by a factor of two for every 10°C increase above 25–30°C (18°F above 77–86°F). Always keep the LiPo Batteries cool.
Prevent over-discharging. Cell reversal can cause an electrical short.
On high load and repetitive full discharges, reduce stress by using larger LiPo Batteries.
A moderate DC discharge is better for a LiPo battery than a pulse and heavy momentary loads.
A LiPo battery exhibits capacitor-like characteristics when discharging at high frequency. This allows higher peak currents than is possible with a DC load.
Nickel- and lithium-based LiPo Batteries have a fast chemical reaction; lead-acid is sluggish and requires a few seconds to recover between heavy loads.
All LiPo Batteries suffer stress when stretched to maximum permissible tolerances.

Rigorous Testing and Fast Delivery

All High Rate LiPo Batteries will be rigorously tested before shipping. It is significant to ensure a higher quality of  LiPo Batteries. What’s more, we stock additional High Discharge C rating LiPo Batteries for samples and small order, you can get it faster than making a new sample.

To select the Best LiPo Batteries for your RC helicopter

To select a LiPo Battery for your RC helicopter, you first need to know what voltage you require and how much current you will be drawing continuously. If the motor in your RC helicopter is rated to work with 14.8V, you would need a 4 cell LiPo battery. If you need to draw 10A, and you would like your RC helicopter to have a 10 minute (1/6th of an hour = 6C) flight, you would need a LiPo battery with 10A / 6 = 1.7A = 1700mAh. This means you would need to put a 3s 1700mAh LiPo battery with a C rating of 6 or higher in your RC helicopter.

The Application with High Rate Discharge LiPo Batteries 10C:

Fill out my online form.

LiPol manufacturers offer both lithium-ion batteries and lithium-polymer batteries, Reliable Leading Rechargeable LiPo Batteries Batteries Manufacturer, Leading LiPo Batteries Manufacturer, Over 30 Years Rechargeable LiPo Batteries Expert, Competitive Price with High Quality, Flexible Dimensions High Energy Density, Accept Small Sample Order & Custom Dimensions, Accept OEM & ODM orders.
LiPol is a Leading LiPo Batteries Manufacturer, 3.7V Hot Selling Rechargeable LiPo Batteries Manufacturer, 3.7V Standard LiPo Batteries Large Wholesale, Accept Small Orders, Certificated Rechargeable LiPo Batteries OEM Factory Supply.
LiPol is a Leading LiPo Batteries Manufacturer. We Design And Manufacture Custom LiPo Batteries Packs To Customers’ Specification, If You Need A Specific LiPo Batteries Pack, We Can Advise The Best Possible Solution, and Customized Your LiPo Batteries in Any Size, Capacity, and Shape, Meet Your Different Needs by Assembling the LiPo Battery in Series and Parallel.
Leading LiPo Batteries Manufacturer, We have thousands of models with LiPo Batteries in stock, we can not put every model on our website and inventory changes every day, pls contact us before your consideration, we can offer you a recommendation.
Size, voltage, current, and Capacity adjust according to customer needs. Some LiPo Batteries add terminals connectors, length of the cables, all LiPo Batteries assemble & Parallel, which is our customized products according to different customers. You can also contact us in the bottom contact form to ask about your needs if you want a custom lead wire connection of the LiPo Batteries, Such as alternate lead wire length & strip lengths, with a connector (e.g. Molex, JST). You can contact us from the footer form and tell us your need. Any problems will be taken seriously and answered professionally, so pls do not hesitate to contact us by the footer form.

LiPo Batteries: Basics about Discharging

The purpose of a LiPo battery is to store energy and release it at the desired time. This section examines discharging under different C-rates and evaluates the depth of discharge to which a LiPo Battery can safely go. The document also observes different discharge signatures and explores battery life under diverse loading patterns.

The electrochemical LiPo Batteries have the advantage over other energy storage devices in that the energy stays high during most of the charge and then drops rapidly as the charge depletes. The supercapacitor has a linear discharge, and compressed air and a flywheel storage device is the inverse of the LiPo Batteries by delivering the highest power at the beginning. Figures 1, 2, and 3 illustrate the simulated discharge characteristics of stored energy.

Most rechargeable LiPo batteries can be overloaded briefly, but this must be kept short. LiPo Batteries longevity is directly related to the level and duration of the stress inflicted, which includes charge, discharge, and temperature.
Remote control (RC) hobbyists are a special breed of LiPo batteries users who stretch tolerance of “frail” high-performance LiPo batteries to the maximum by discharging them at a C-rate of 30C, 30 times the rated capacity. As thrilling as an RC helicopter, race car and fast boat can be; the life expectancy of the packs will be short. RC buffs are well aware of the compromise and are willing to both pay the price and encounter added safety risks.

To get maximum energy per weight, drone manufacturers gravitate to cells with a high capacity and choose the Energy Cell. This is in contrast to industries requiring heavy loads and long service life. These applications go for the more robust Power Cell at a reduced capacity.

 

Simple Guidelines for Discharging LiPo Batteries
  • Heat increases LiPo Batteries performance but shortens life by a factor of two for every 10°C increase above 25–30°C (18°F above 77–86°F). Always keep the LiPo Battery cool.
  • Prevent over-discharging. Cell reversal can cause an electrical short.
  • On high load and repetitive full discharges, reduce stress by using a larger LiPo Battery.
  • A moderate DC discharge is better for a LiPo Battery than pulse and heavy momentary loads.
  • A LiPo Battery exhibits capacitor-like characteristics when discharging at high frequency. This allows higher peak currents than is possible with a DC load.
  • Nickel- and lithium-based LiPo batteries have a fast chemical reaction; lead acid is sluggish and requires a few seconds to recover between heavy loads.
  • All LiPo batteries suffer stress when stretched to maximum permissible tolerances.
Units of LiPo Batteries Capacity: Ampere Hours

The energy stored in a LiPo Battery called the LiPo Battery capacity is measured in either watt-hours (Wh), kilowatt-hours (kWh), or ampere-hours (Ahr). The most common measure of LiPo battery capacity is Ah, defined as the number of hours for which a LiPo Battery can provide a current equal to the discharge rate at the nominal voltage of the LiPo battery. The unit of Ah is commonly used when working with LiPo battery systems as the LiPo battery voltage will vary throughout the charging or discharging cycle. The Wh capacity can be approximated from the Ahr capacity by multiplying the AH capacity by the nominal (or, if known, time average) LiPo battery voltage. A more accurate approach takes into account the variation of voltage by integrating the AH capacity x V(t) over the time of the charging cycle. For example, a 12 volt LiPo battery with a capacity of 500 Ah LiPo battery allows energy storage of approximately 100 Ah x 12 V = 1,200 Wh or 1.2 KWh. However, because of the large impact from charging rates or temperatures, for partial or accurate analysis, additional information about the variation of LiPo battery capacity are also provided by lipo batteries manufacturers.

LiPo Batteries: Operating Voltage Range

Max Operating Voltage Range: 2.75V to 4.2V
Max Charge Voltage: 4.2V±50mV
Discharge Cut-off: 2.75V
Internal Impedance: <200mΩ
Expected Cycle Life: 500 cycles ≥ 80%

The voltage for long-time storage of LiPo Batteries used in the R/C model should be 3.6~3.9V range per cell, otherwise, otherwise it may cause damage to the LiPo Battery.

LiPo Batteries packs also see widespread use in airsoft, where their higher discharge currents and better energy density compared to more traditional NiMH batteries have very noticeable performance gain (higher rate of fire). The high discharge currents do damage the switch contacts due to arcing (causing the contacts to oxidize and often deposit carbon), so it is advised to either use a solid-state MOSFET switch or clean the trigger contacts regularly.

Charge & Discharge current of the LiPo Batteries?

The Standard LiPo Battery(Capacity below 3000mAh) ‘s max discharge current is 1C, and the max charge current is 0.5C, The standard charge current is 0.2C.
The standard discharge current is 0.5C

Standard LiPo Batteries Max discharge is 3A.
Max charge current is 2A.
High Rate LiPo Batteries depend on the C rate and PCM.

LiPo Batteries have a flexible, foil-type (polymer laminate) case, so they are relatively unconstrained.
LiPo Batteries Charge/discharge at 0.5C/0.5C, 80% residual capacity after 500 cycles.

LiPo Batteries provide manufacturers with compelling advantages. They can easily produce LiPo Batteries of almost any desired shape. For example, the space and weight requirements of mobile devices and notebook computers can be met. They also have a low self-discharge rate, which is about 5% per month.

How should lipo batteries be stored?

Always store your LiPo batteries at room temperature, and charge them per 6-8 months.

How to take care of lipo batteries?

Caution!  - Leading LiPo Batteries Manufacturer

In order to prevent the LiPo Battery from possibly occurring leaks, overheating, swollen, please note the preventive measure.

Handling Precautions and Guideline:

1.

When charged please select the LiPo Battery special battery charger.

2.

Strictly prohibits inverting the cathode use LiPo Battery.

3.

Strictly prohibits directly connecting LiPo Battery to power source plug

4.

Please do not throw the LiPo Battery into water or put it into the heater

5.

Strictly prohibits plunging the LiPo Battery in seawater or water, when LiPo Battery does not use, please store LiPo Battery in a cool dry environment.

6.

The prohibition in strong static electricity and strong magnetic field place use otherwise is easy to destroy the LiPo Battery PCBA

7.

The prohibition puts the LiPo Battery nearby the hot high-temperature source, like the fire, the heater, and so on use and leaves alone

8.

The prohibition directly connects the LiPo Battery cathode with the metal to short-circuit.

9.

The prohibition rap or throws, steps on the LiPo Battery and soon

10.

Forbids directly to weld the LiPo Battery and pierces the LiPo Battery with the nail or other sharp weapons

11.

If the LiPo Battery sends out an unusual smell, gives off heat, the distortion or appears any exceptionally, immediately moves the LiPo Battery from the installment or the LiPo Battery charger to and stops using

12.

If the LiPo Battery occurs leaks, the electrolyte enters the eye, please do not have to rub scratches, the application clear water flushing eye and delivers the medical treatment otherwise to be able immediately to injure the eye

13.

When LiPo Battery long-term storage, or assembly in the host, suggest customer should take every 6months carry on one-time charge and discharge and recharge it to half charged state (3.7-3.9V)(the method: 0.2CmA charge and discharge)

14.

Abandon the LiPo Battery to wrap up the electrode using the insulating paper, prevented the LiPo Battery from short-circuits

15.

Do not decompose the LiPo Battery

16.

Keep small LiPo cells and LiPo Batteries which are considered swallowable out of the reach of children

17.

Swallowing may lead to burns, perforation of soft tissue, and death. Severe burns can occur within 2 h of ingestion

18.

In case of ingestion of a LiPo cell or LiPo Battery, seek medical assistance promptly.

Contact us: LiPo Batteries.net

 

Have not found a suitable LiPo Battery for your prototype?

Every month we make some new models but don't update them in time. Please send us the dimension range (length x width x thickness) and capacity. We will check the ones that haven't been shown online.

Besides we can provide you with a customized LiPo Battery.

Get answer before you buy LiPo Batteries. Whether a quote or a specification request from our LiPol battery section,We do not provide telephone support, the reason being that it is impossible to offer a quality product at an attractive price or answer your questions without making some compromises. We have decided to compromise on human resources rather than the technical.

 

Fill out my online form.