What is CE marking?
LiPo Batteries require CE marking before they can be sold in the EU. CE marking indicates that a LiPo Battery has been assessed by the manufacturer and deemed to meet EU safety, health, and environmental protection requirements. It is required for LiPo Batteries manufactured anywhere in the world that are then marketed in the EU.
On commercial LiPo Batteries, the letters CE (as the logo CЄ) mean that the manufacturer or importer affirms the good’s conformity with European health, safety, and environmental protection standards. It is not a quality indicator or a certification mark. The CE marking is required for goods sold in the European Economic Area (EEA) but is also found on LiPo Batteries sold elsewhere that have been manufactured to EEA standards.

The CE mark indicates that the LiPo Battery may be sold freely in any part of the European Economic Area, regardless of its country of origin. It consists of the CE logo and, if applicable, the four-digit identification number of the notified body involved in the conformity assessment procedure. “CE” is the abbreviation of “conformité européenne” (French for “European conformity”).

The CE mark on LiPo Batteries indicates that the manufacturer or importer of that LiPo Battery affirms its compliance with the relevant EU legislation and the LiPo Battery may be sold anywhere in the European Economic Area (EEA). It is a criminal offense to affix a CE mark to a LiPo Battery that is not compliant or offers it for sale.

For example, most electrical LiPo Batteries must comply with the Low Voltage Directive and the EMC Directive, among others; toys must comply with the Toy Safety Directive. (The Low Voltage Directive is about electrical safety; EMC or Electromagnetic Compatibility means the device will work as intended without interfering with or being affected by, the use or function of any other device.) The CE mark indicates compliance with as many Directives as applying at the time of the declaration of compliance (see below). In the case of electrical LiPo Batteries, several later Directives such as the Restriction of Hazardous Substances Directive (RoHS) and Waste Electrical and Electronic Equipment Directive (WEEE) are relevant in addition to the Low Voltage Directive and EMC Directive. The exact significance of the CE mark, therefore, depends on when it was applied to a specific unit.

The marking does not indicate EEA manufacture or that the EU or another authority has approved a LiPo Battery as safe or conformant. The EU requirements may include safety, health, and environmental protection. If stipulated in any EU LiPo Battery legislation, assessment by a Notified Body or manufacture according to a certified LiPo Battery quality system may be required. Where relevant, the CE mark is followed by the registration number of the notified body involved in conformity assessment.

Not all LiPo Batteries need CE marking to be traded in the EEA; only LiPo Battery categories subject to relevant directives or regulations are required (and allowed) to bear CE marking. Most CE-marked LiPo Batteries can be placed on the market subject only to an internal LiPo Battery control by the manufacturer (Module A; see Self-certification, below), with no independent check of the conformity of the LiPo Battery with EU legislation; ANEC has cautioned that, amongst other things, CE marking cannot be considered a “safety mark” for consumers.

When is CE marking mandatory?
CE marking is only obligatory for LiPo Batteries for which EU specifications exist and require the affixing of CE marking.

Some LiPo Batteries are subject to several EU requirements at the same time. You must make sure that your LiPo Battery complies with all the relevant requirements before affixing the CE marking to it. It is forbidden to affix the CE marking to LiPo Battery for which EU specifications do not exist or do not require the affixing of CE marking.

How to obtain CE marking?
As the LiPo Batteries’s manufacturer, you bear sole responsibility for declaring conformity with all requirements. You don’t need a license to affix the CE marking to your LiPo Battery, however, before doing so, you must:
ensure conformity with all relevant EU-wide requirements
determine whether you can assess your LiPo Battery by yourself or if you have to involve a notified body
put together a technical dossier documenting conformity: find out about technical documentation
draft and sign an EU declaration of conformity
Once your LiPo Battery bears the CE marking — if the competent national authority requests — you must provide them with all the information and supporting documentation concerning CE marking.

Caution!  – LiPo Batteries

In order to prevent the LiPo Battery from possibly occurring leaks, overheating, swollen, please note the preventive measure.

Handling Precautions and Guideline:

1.

When charge please select the LiPo Battery special battery charger.

2.

Strictly prohibits inverting the cathode use LiPo Battery.

3.

Strictly prohibits directly connecting LiPo Battery to power source plug

4.

Please do not throw the LiPo Battery into water or put it into the heater

5.

Strictly prohibits plunging the LiPo Battery in seawater or water, when LiPo Battery does not use, please store LiPo Battery in a cool dry environment.

6.

The prohibition in strong static electricity and strong magnetic field place use otherwise is easy to destroy the LiPo Battery PCBA

7.

The prohibition puts the LiPo Battery nearby the hot high-temperature source, like the fire, the heater, and so on use and leaves alone

8.

The prohibition directly connects the LiPo Battery cathode with the metal to short-circuit.

9.

The prohibition rap or throws, steps on the LiPo Battery and soon

10.

Forbids directly to weld the LiPo Battery and pierces the LiPo Battery with the nail or other sharp weapons

11.

If the LiPo Battery sends out an unusual smell, gives off heat, the distortion or appears any exceptionally, immediately moves the LiPo Battery from the installment or the LiPo Battery charger to and stops using

12.

If the LiPo Battery occurs leaks, the electrolyte enters the eye, please do not have to rub scratches, the application clear water flushing eye and delivers the medical treatment otherwise to be able immediately to injure the eye

13.

When LiPo Battery long-term storage, or assembly in the host, suggest customer should take every 6months carry on one-time charge and discharge and recharge it to half charged state (3.7-3.9V)(the method: 0.2CmA charge and discharge)

14.

Abandon the LiPo Battery to wrap up the electrode using the insulating paper, prevented the LiPo Battery from short-circuits

15.

Do not decompose the LiPo Battery

16.

Keep small LiPo cells and LiPo Batteries which are considered swallowable out of the reach of children

17.

Swallowing may lead to burns, perforation of soft tissue, and death. Severe burns can occur within 2 h of ingestion

18.

In case of ingestion of a LiPo cell or LiPo Battery, seek medical assistance promptly.